Checklist & Wallpaper Install Guide

Peel & Stick Wallpaper

Peel-and-stick wallpaper offers an affordable, DIY friendly alternative to traditional wallcoverings. The self-adhesive backing doesn't require any messy paste or glues, and if you make a mistake while applying, you can simply peel it off and start over.

Below you'll find our important Pre-Purchase Checklist to follow before placing your order, along with a step-by-step installation guide on how to apply peel-and-stick wallpaper to achieve bubble-free, long-lasting results.

Watch how easy it is to install yourself or, with the help of a friend!

Step-by-Step Installation Guide

1. Turn off all power points for safety, remove power outlet and light switch covers before commencing the below cleaning process.

2. Clean the wall’s surface by wiping it down with a damp cloth (don’t use any chemical cleaners). Wait 24 hours to allow your wall to completely dry.

3. Always lay out your wallpaper panels, check them thoroughly for any imperfections and to ensure they're in the correct order prior to installing.

4. Roll up your first panel (this helps with installing!) and peel off a few inches of the adhesive backing, folding the backing paper away from the adhesive.

5. Line the wallpaper up, level with the wall and ceiling. From the top to bottom, smooth wallpaper down with clean, dry hands (don’t use any hard objects or smoothing tools to smooth the wallpaper down as it may harm the fabric wallpaper). Work your way down the panel, removing backing paper and smoothing out any bubbles as you go (watch our install videos above!). You do not overlap our wallpaper, it comes with a pre-trimmed butt join and is checked before shipping that it aligns perfectly on a level wall.

6. Don’t forget, peel-and-stick wallpaper is repositionable and made of a flexible fabric making it easy to guide into position and align the pattern. If you need to adjust the placement or re-align the pattern - simply peel the wallpaper panel back off the wall slowly and re-apply / realign as required.

7. Once your first piece is adhered to your wall, you can start the same process with your next panel. Line up the pattern and install per step 4, 5 and 6.

8. If any air bubbles are present, use the tip of a pin to create a tiny hole and gently press to release any air, alternatively you can peel back the panel and re-smooth. (If you get ongoing bubbles after install it means your paint is rejecting the adhesive, refer to 'Pre-Purchase Checklist' section above)

9. Once all panels are installed, slowly and carefully trim off any excess using a straight edge and a utility knife.

Now you’re ready to style your room, take a photo and share it with us on Instagram by tagging @oliveetoriel

How does it all work?

How do I measure?

Simply measure the width & height of your space then select the next size up, you may have some excess however this is unavoidable (as we're unable to print half panels.)


If you require wallpaper for a small DIY project, we recommend you purchase a single panel by contacting Customer Care. All other sizes shown in the drop down menu are designed for standard room sizes.


If you require longer/taller panels, that's no problem! Just get in touch with our customer care team for a quote:

Please review our detailed product information on the wallpaper you are looking at purchasing to ensure your paint is compatible with self-adhesive wallpaper.

How long does it take to ship?

Olive et Oriel proudly produces all wallpaper right here in Australia, custom made to your specifications. This allows us to alter most designs to be specific to your colour palette should you need something a little more unique!


All wallpapers are printed and shipped within 24hrs* of ordering.


We ship our Peel & Stick self-adhesive wallpapers all around the world. Please review our shipping guide for information on transit times to your home.


*Should your wallpaper not pass our strict quality control measures, this may delay our standard turnaround time - however, we will contact you to let you know if this occurs. We want to make sure your new wallpaper is perfect!

Custom sizes

If you can't find the wall size you require, don't worry - simply get in touch with our Customer Care team who will happily assist with your enquiry, please call 0497 453 519 during business hours or email


Olive et Oriel business hours are:
Monday - Saturday 8am - 4.30pm AEST


We are located an hour north of Sydney, NSW on the Central Coast of Australia.

What is it made from?

The new way to wallpaper is here; our self-adhesive peel-and-stick wallpaper has a patented adhesive backing, meaning no more messy glue or sticky residue!

Olive et Oriel 'Peel & Stick' wallpaper is made from an opaque woven/fabric matte wallpaper suitable for residential & light commercial interiors.

The base fabric of Olive et Oriel wallpaper is: 50% Polyester, 45% Polyethylene
All wallpaper is printed using VOC-free inks.

Proudly made in Australia by Olive et Oriel.

You shouldn’t have to wait to decorate your home. We print & ship all wallpaper orders within 24hrs.

- Teigan McCleary
Founder, Olive et Oriel